• Lubrication Products
  • DNFT Models
  • Digital Monitors
  • Accessories

Welcome to the DNFT lubrication monitoring section of our site!

No Flo

spacer

Digital No Flow Timers (DNFT)

 

DNFT

 

Spec Sheets

LED 2 min

2min LED

LED 3 min

3 min LED

LCC 45 sec

LCC 45sec

LCC 2 min

LCC 2 min

LCC 3 min

LCC 3min

LCC 255 secs

LCC 255sec

PRG 20-255sec

LCC PRG

PRG PS 20-255

LCC PRG-PS

The Revolutionary Digital No-Flow Timer for Compressor Lube Systems 

DNFT performs monitoring and shutdown functions like No-Flow, Low-Flow or Excessive-Flow for Divider-Block Lubrication Systems. The DNFT is a totally enclosed solid state electronic device for detecting Slow-Flow and No-Flow on in-line progressive lubrication systems. The Digital No-Flow Timer incorporates a crystal oscillator to accurately monitor the cycle time of the lubrication system enabling precision timed shutdown capability. An internal Lithium battery powers it, which is easily replaceable.

The Digital No-Flow Timer is an ISO 9001 certified product and the ISO certification can be viewed here. All Digital No-Flow Timers also come with a 3 year warranty.

The DNFTs come in three models to switch voltages up to 240 VDC:

  • LED model
  • LCC model
  • PRG model

 

Digital Lubrication Monitors

 

Digital Lube Monitor 1Digital Lube Monitor 2

The DLM uses the newest microprocessor and transistor technologies to detect SLOW-FLOW and NOFLOW conditions by monitoring divider block lubrication systems.

Spec Sheets

DLM-811

DLM-811

DLM-812

DLM-812

DLM-820

DLM-820

DLM-821

DLM-821

DLM-822

DLM-822

DLM-830

DLM-830

DLM-831

DLM-831

DLM-900

DLM-900

DLM-920

DLM-920

DLM-926

DLM-926

DLM-928

DLM-928

A digital lubrication monitor displays total run-time hours and total oil consumption in pints. Lubricant flows through the divider valve assembly forcing the divider block pistons to cycle, operating the proximity switch. It's internal microprocessor resets the timer, lights the LED, and allows the unit to continue operation by monitoring the proximity switch. The blink of the LED indicates one complete cycle of the lubrication system and enables the operator to accurately monitor and control oil consumption rates. The pulse must be received in a predetermined time or a shutdown will occur.

The Digital Lubrication Monitor come in following models:

  • DLM 811
  • DLM 812
  • DLM 820
  • DLM 821
  • DLM 822
  • DLM 830
  • DLM 831
  • DLM 900
  • DLM 920
  • DLM 926
  • DLM 928

 

 

  • Proximity Switches
  • Cycle Indicators
  • Purge Guns

Deliron Proximity Switches

 

Proximity Switch

S- denotes 'Sealed'

-BH denotes 'Brad Harrison Connect'

Spec Sheets

DropsA

DropsA proximity switch

Lincoln

Lincoln Proximity Switch

Trabon-G

Trabon Proximity Switch

Trabon-O

Trabon O-ring Proximity Switch

S-DropsA

Sealed DropsA Proximity Switch

S-Lincoln

Sealed Lincoln Proximity Switch

S-Trabon-G

Sealed Trabon Proximity Switch

S-Trabon-O

Sealed Trabon O-ring Proximity Switch

S-Dropsa-BH

Sealed DropsA Proximity Switch BH

S-Lincoln-BH

Sealed Lincoln Proximity Switch

S-TrabonG-BH

Sealed Trabon Gasket Proximity Switch

S-TrabonO-BH

Sealed Trabon O-ring

The proximity switch is a device that accurately monitors fluid or grease lubrication systems. The proximity switch is manufactured using a custom machined stainless steel housing and a powerful internal magnet assembly built for industrial use. The proximity switch is easy to install and can be installed on any section, on either side of a divider block. The SPS (Sealed Proximity Switch) is a completely sealed monitoring device.

 

Deliron Cycle Indicators

 

Cycle Indicators

 

Spec Sheets

DropsA

DCI Dropsa

Lincoln

DCI Lincoln

Trabon Gasket

DCI Trabon Gasket

Trabon O-Ring

DCI Trabon O-Ring

The Deliron cycle indicator is a cost-effective and easy-to-install lubrication monitoring device.

It has a custom-machined stainless steel housing and a powerful internal magnet assembly built for industrial use. The Deliron cycle indicator is completely sealed and can accurately monitor fluid or grease systems. The Deliron cycle indicator can be installed on any section and either side of a divider block. The highly visible cycle indicator has a snap-action movement which makes it easy for the user to see as well as determine the precise timing of each divider valve cycle.

The Deliron cycle indicator comes in the following four models:

* The DCI-D model for DropsA lube blocks
* The DCI-L model for Lincoln lube blocks
* The DCI-TG model for Trabon Gasket style blocks
* The DCI-TO model for Trabon O-ring style blocks

 

Purge Guns

Purge Gun

Specifications

PN code

Dependability when you need it

The lubrication purge gun is an easy-to-use, lever-action hand pump lubricator. The lubrication purge gun can be used to manually purge oil systems, test oil systems, or test the condition of a divider valve system. The lubrication purge gun's rugged cast iron head and aluminum chamber make it very durable and long lasting. The custom machined aluminum housing has slotted "windows" which enables the user to easily see the oil level remaining. This allows the user to refill the chamber before it is completely emptied, preventing air from being pumped into the system. The 40 inch hose assembly includes it's own built-in check valve and is rated for 5000 psi as shown on the liquid-filled pressure gauge.

 

 

Webmaster